prikaz prve stranice dokumenta Dizajniranje, izrada i testiranje programabilnog izmjeničnog trošila (70 V, 10 A, 400Hz)
  Download
PDF 1.52 MB
undergraduate thesis
Dizajniranje, izrada i testiranje programabilnog izmjeničnog trošila (70 V, 10 A, 400Hz)
2018. urn:nbn:hr:200:323538
Fadiga, Ivan
Josip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
Department of Electromechanical Engineering
Chair of Fundamentals of Electrical Engineering and Measurements

Cite this document

Fadiga, I. (2018). Dizajniranje, izrada i testiranje programabilnog izmjeničnog trošila (70 V, 10 A, 400Hz) (Undergraduate thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:200:323538

Fadiga, Ivan. "Dizajniranje, izrada i testiranje programabilnog izmjeničnog trošila (70 V, 10 A, 400Hz)." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2018. https://urn.nsk.hr/urn:nbn:hr:200:323538

Fadiga, Ivan. "Dizajniranje, izrada i testiranje programabilnog izmjeničnog trošila (70 V, 10 A, 400Hz)." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2018. https://urn.nsk.hr/urn:nbn:hr:200:323538

Fadiga, I. (2018). 'Dizajniranje, izrada i testiranje programabilnog izmjeničnog trošila (70 V, 10 A, 400Hz)', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, accessed 22 September 2023, https://urn.nsk.hr/urn:nbn:hr:200:323538

Fadiga I. Dizajniranje, izrada i testiranje programabilnog izmjeničnog trošila (70 V, 10 A, 400Hz) [Undergraduate thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek; 2018 [cited 2023 September 22] Available at: https://urn.nsk.hr/urn:nbn:hr:200:323538

I. Fadiga, "Dizajniranje, izrada i testiranje programabilnog izmjeničnog trošila (70 V, 10 A, 400Hz)", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, Osijek, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:200:323538

Please login to the repository to save this object to your list.
Metadata
TitleDizajniranje, izrada i testiranje programabilnog izmjeničnog trošila (70 V, 10 A, 400Hz)
Title (english)Design, manufacture and testing of programmable AC load (70 V, 10 A, 400Hz)
AuthorIvan Fadiga
MentorKruno Miličević (mentor)
Committee memberKruno Miličević (predsjednik povjerenstva)
Committee memberZdravko Krpić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
(Department of Electromechanical Engineering)
(Chair of Fundamentals of Electrical Engineering and Measurements)
Osijek
Defense date and country2018-09-17, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Electronics
Abstract
U završnom radu opisano je što je sve potrebno da bi se neki sklop napravio od ideje do krajnjeg uređaja. Sklop je nakon izrade testiran i uz manje promjene na pločici dobiveni su rezultati kao što je dobiveno simulacijom u računalnom programu Tina TI. Pri svakom testiranju napajanja ili elektronike koja pogoni neka trošila može se koristiti programabilno trošilo koje uvelike ubrzava proces testiranja jer nam omogućuje da brzim promjenama postavki prilagodimo trošilo uvjetima koji nam trebaju za testiranje. Na kraju rada je opisano i testiranje i promjene koje su napravljene da bi sklop radio. Sva mjerenja su rađena sa regulacijskim izmjeničnim izvorom, struja je mjerena analognim instrumentom, a napon digitalnim te su sa osciloskopom snimljeni valni oblici napona i struje kroz trošilo
Abstract (english)
The final work describes what is needed to make a circuit from an idea to the end device. After fabrication, the assembly was tested and with fewer changes on the printed circuit board, results are same as results obtained by simulation in Tina TI computer program. A programmable electronic load can be used in every test of power or electronics that drives some load that significantly accelerates the testing process, because it allows us to adapt the settings quickly by adjusting to the conditions that we need to test. At the end of the paper, the test and changes that were made to make the assembly work are described. All measurements were done with a variable AC source, the current was measured by an analog instrument, voltage was measured with digital instrument and waveforms of voltage and current through the load were recorded with an oscilloscope.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:200:323538
Study programmeTitle: Undergraduate University Study Programme
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2018-10-23 11:30:29