prikaz prve stranice dokumenta Modeliranje i analiza induktivnog senzora pomaka korištenjem FEM alata
  Download
PDF 4.11 MB
master's thesis
Modeliranje i analiza induktivnog senzora pomaka korištenjem FEM alata
2020. urn:nbn:hr:200:060625
Dunković, Matej
Josip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
Department of Electromechanical Engineering
Chair of Fundamentals of Electrical Engineering and Measurements

Cite this document

Dunković, M. (2020). Modeliranje i analiza induktivnog senzora pomaka korištenjem FEM alata (Master's thesis). Retrieved from https://urn.nsk.hr/urn:nbn:hr:200:060625

Dunković, Matej. "Modeliranje i analiza induktivnog senzora pomaka korištenjem FEM alata." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2020. https://urn.nsk.hr/urn:nbn:hr:200:060625

Dunković, Matej. "Modeliranje i analiza induktivnog senzora pomaka korištenjem FEM alata." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2020. https://urn.nsk.hr/urn:nbn:hr:200:060625

Dunković, M. (2020). 'Modeliranje i analiza induktivnog senzora pomaka korištenjem FEM alata', Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, accessed 23 March 2023, https://urn.nsk.hr/urn:nbn:hr:200:060625

Dunković M. Modeliranje i analiza induktivnog senzora pomaka korištenjem FEM alata [Master's thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek; 2020 [cited 2023 March 23] Available at: https://urn.nsk.hr/urn:nbn:hr:200:060625

M. Dunković, "Modeliranje i analiza induktivnog senzora pomaka korištenjem FEM alata", Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, Osijek, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:200:060625

Please login to the repository to save this object to your list.
Metadata
TitleModeliranje i analiza induktivnog senzora pomaka korištenjem FEM alata
Title (english)Modeling and analisys of inductive position sensor by using FEM tools
AuthorMatej Dunković
MentorMarinko Barukčić (mentor)
Committee memberMarinko Barukčić (predsjednik povjerenstva)
Committee memberTomislav Barić (član povjerenstva)
Committee memberToni Varga (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
(Department of Electromechanical Engineering)
(Chair of Fundamentals of Electrical Engineering and Measurements)
Osijek
Defense date and country2020-02-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Electromechanical Engineering
Abstract
U ovom radu, modelirane su i simulirane četiri izvedbe induktivnih senzora pomaka korištenjem FEM alata. Promatrana je promjena induktiviteta prelaskom tanke bakrene trake iznad zavojnice te utjecaj promjene frekvencije na osjetljivost senzora. Simulacijama nije prikazana promjena geometrije na osjetljivost senzora već samo usporedba četiri senzora koji imaju isti broj zavoja, iste dimenzije trake zavojnice. Na kraju rada je dana usporedba spiralne, kvadratne, heksagonalne i oktogonalne zavojnice
Abstract (english)
In this thesis, four different design types of inductive sensors were modeled and simulated using FEM tools. Change of inductance is observed by moving thin copper plate horizontally above the sensor and also influence of frequency change on sensor sensitivity was observed. Simulations did not cover effect of geometry change on sensor sensitivity, simulations only compared four sensor designs which have equal number of coil turns, same dimensions of coil track width and height. In the end of thesis, comparison between spiral, square, hexagonal and octagonal coils is given
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:200:060625
Study programmeTitle: Graduate University Study Programme in Electrical Engineering; specializations in: Communications and Informatics, Power Engineering
Course: Power Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka elektrotehnike (magistar/magistra inženjer/inženjerka elektrotehnike)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2020-03-09 14:34:12